Dial-Now fails to recognize time-out
Hi support, If I set the Dial-Now rules directly from the GUI, when the phone recognizes the rule, it will dial according to the "Time out for Dial-now Rule" parameter (which is 1 second). But if I...
View ArticleNeed to turn on Distinctive Rings on SIP-Account
Hi! Wi're currently testing with the v71 Firmware One issue: I have to enabkle custom ringtones on the account under Account/Advanced/Distinctive Ringtones (value needs to be set to Enbabled) Cant find...
View ArticleClik here to view.
DHCP Hostname
Hi, Is it possible to set the DHCP hostname via auto provision? Is there a way to add this to the mac orientated .cfg file? Would be great if possible Thanks Ben
View ArticleT46G Call Completition feature not working
Hi, I'm testing right now the Call Completition feature, but it seems not working. I enabled it from: Features / General Information / Call Completion = Enabled I call a busy number, but not call...
View ArticleProblems T28P+EXP38
Hello, we have a T28P with three EXP38 attached. Each time the phone is rebooted for any reason, EXP38s require AT LEAST HALF HOUR to get fully and stable functionality. After the reboot, some lights...
View ArticleYealink Caller ID when transfering and rejecting calls
Hello, I have experienced an odd behavior when two Yealink phones are dialing each other. If phone A dials phone B (both Yealink), phone B answers and then transfer to an invalid destination, then the...
View ArticleDisable Features DND and Call Forward
Good Afternoon, I am needing to disable the DND and Call Forward features of IP Phones T22p configuration through provisioning. What options do I need to switch to disable these features? att. Jason
View ArticleT42G & T46G Echo and Hollow sound
I have a 3CX install using T42G and T46G phones and all have experienced echo and a 'hollow' sound during calls to the outside. It doesn't happen on intercom calls. I see there are settings for echo...
View ArticleLDAP contact lookup with configuration files
Hi I'm trying to configure 100+ T22p phones with LDAP contact lookup. I've configured one handset manually and it's all working. So I've exported the config from that handset and copied the [ LDAP ]...
View ArticleClik here to view.
T38G with 2EXP38
Hello. We have a problem with 2 exp38 connect with a T38G, In the interface of T38G shows just one exp38. and two exp38 are connect correctly. We probe with a source power but neither. Some Idea?...
View ArticleBroadsoft vs Yealink Firmwaer
What is the difference between standard Yealink and Broadsoft firmware builds? Is there any benefit to using the Broadsoft firmware if I am not utilizing any Broadsoft products or services?
View ArticleKeeps rebooting
I now have one of the W52 hand sets that just keeps rebooting after 15 minutes or so being connected to the base.. It losers the base connection after about 15 minutes then just stars rebooting. even...
View ArticleMusic on Hold MOH
Does anyone have a list of URL's that will just work with the yealink phones for music on hold. I have managed to find one url that does work but to have a list of others would be fantastic....
View ArticleSpeakerphone fading out
Hello, One of our customers using a T38G reported that when he is on the speakerphone, the microphone becomes weaker and weaker. People reported that they couldn't hear him well until he picked up the...
View ArticleT20P don't show all text in display
Hi, I'm using T20P. When I scroll in the menu you can't see all text in the display when texts are so long. Is there any way to see all text?
View ArticleT-38 autoprovision
How can I autoprovision the screen saver to off. firmware 38.70.0.198
View ArticleAuto "New Call" with call on hold
When I have a call on hold and I start dialing an outside number (not using a BLF key), is there a way to have the phone start a new call automatically? I know that after putting the caller on hold I...
View ArticleYealink T-4x provisioning : codecs and garbled sound
Hello, when defining the audio codecs in a provisioning file, the audio is garbled. This is not the case when I leave out any parameters that have to do with codecs, or when I manually configurate the...
View ArticleClik here to view.
【Advice & Suggestions】Whether to cancel annotations in CFG
Hi all, I make a survey about whether to cancel annotations in CFG. [NOTE] For example, In version 71, CFG files contain below annotations which start as #:...
View ArticleT4X Series VLAN ISSUE with Netgear Switch
Hi, We are having a issue with our new Yealink T4X Series. We have tested this with the T46G and the T42G. Once connected to VLAN, they become incommunicable Tested with the following Netgear switch on...
View Article