【Advice & Suggestions】Whether to cancel annotations in CFG

Hi all,

I make a survey about whether to cancel annotations in CFG.

[NOTE]
For example,
In version 71, CFG files contain below annotations which start as #:

-----------------------------------------------------
################################################################################​#######
## VLAN ##
################################################################################​#######
network.vlan.internet_port_enable = 0

#Configure the VLAN ID, it ranges from 1 to 4094, the default value is 1.
#Require reboot;
network.vlan.internet_port_vid =

#Configure the VLAN priority, it ranges from 0 (default) to 7.
#Require reboot;
network.vlan.internet_port_priority =

#Enable or disable the VLAN of PC port; 0-Disabled (default), 1-Enabled;
#Require reboot;
network.vlan.pc_port_enable =

#Configure the VLAN ID, it ranges from 1 to 4094, the default value is 1.
#Require reboot;
network.vlan.pc_port_vid =

#Configure the VLAN priority, it ranges from 0 (default) to 7.
#Require reboot;
network.vlan.pc_port_priority =

#Enable or disable the DHCP to obtain the information of the VLAN; 0-Disabled; 1-Enabled (default);
#Require reboot;
network.vlan.dhcp_enable =

#Configure the DHCP option to obtain the information of the VLAN. It ranges from 0 to 255.
#Multiple options separated by a comma. It supports up to 5 options in all.
#Require reboot;
network.vlan.dhcp_option =
------------------------------------------------------------

We are checking and systemizing our CFG files to one unify template named version 72, which will cancel annotations in CFG files.

-----------------------------------------------------------
################################################################################​#######
## VLAN ##
################################################################################​#######
network.vlan.internet_port_enable =
network.vlan.internet_port_vid =
network.vlan.internet_port_priority =
network.vlan.pc_port_enable =
network.vlan.pc_port_vid =
network.vlan.pc_port_priority =
network.vlan.dhcp_enable =
network.vlan.dhcp_option =
---------------------------------------------------------
And you need to refer to auto provisioning guide for annotations.

Our product department will check the survey and make the final decision.
To cancel annotations? To keep it as the same as version 71?

Now please don't hesitate to vote or advise!!
Thanks in advance for you kindly advice.


Best Regards
Yealink Support